Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

BEST 3D PRINTERS 2020-2021

BEST 3D PRINTERS 2020-2021

Best Under 100 /Best Overall /Best 10 List /Best Buying Guide

3D printing is an really expensive hobby.If you’re looking for the best 3D printers of 2020, then you’ve come to the right place.So, in this list of the best 3D printers, we’ve got the best home 3D printers that can sit on a table or desk, and are ideal for hobbyists and beginners who are just getting started, as well as professional 3D printers.You can also check for best 3D printers Best Under 200 / Best Under 300 / Best Under 500 / Best Under 1000 too.See3d Scanner List.

We also have the best 3D printers for a wide range of budgets, from affordable 3D printers, to high-end 3D printers.This guide is about the 3D printers that offer both quality and affordable 3d printer  Our reviewed printers are under price range ($300, $500, $1,000). This should make it easier for you to find the product that best suits your budget.

The 6 Best 3D printers 2020

Best 3D Printer Under 200Monoprice Select Mini Buy Now
Best Budget 3D Printer REPRAPGURU DIY RepRap Buy Now
Best 3D Printer Under 300XYZPrinting da Vinci Buy Now
Best 3D Printers Under 1000FlashForge Finder Buy Now
Best affordable 3D Printer QIDI TECHNOLOGY 3DP Buy Now
Best 3D Printer Under 1500LulzBot Mini Desktop Buy Now

Best Under 200:Monoprice Select Mini 3D Printer V2

Best Budget:REPRAPGURU DIY RepRap 3D Printer

Best Under 300:XYZPrinting da Vinci 1.0 Pro. 3D Printer

Best Under 1000:FlashForge Finder 3D Printers

Best Affordable:QIDI TECHNOLOGY 3DP 3D Printer

Best rate:BIBO 3D Printer Dual Extruder

Best Under 1500:LulzBot Mini Desktop 3D Printer

Best Under 2000:MakerGear M2 Desktop 3D Printer

Best Under 2500:LulzBot TAZ 5 Desktop 3D Printer

Best Sellers Printing Filament Printing Liquid

CHECK>BEST 3D PRINTERS RIGHT NOW

BEST 3D PRINTERS UNDER $200

Monoprice Select Mini 3D Printer V2

The Best all-round 3D printer

Buy Now On Amazon 

MP Select Mini 3D Printer Too often, getting a low-cost 3D printer means getting a box of ill-fitted parts with poorly written and incomplete documentation. You end up spending hours on the internet, searching forums and asking for help to get the printer assembled and operating properly. That isn’t how Monoprice operates and this 3D printer is a perfect example! This printer not only comes fully assembled, it has already been calibrated at the factory. All you have to do is perform a quick check to verify that the print bed is still leveled, in case it shifted during shipping, then load the included MicroSDTM card, load some filament, and start printing the preloaded model. Nowhere else will you find a 3D printer ready to print out of the box at such a low price!

Affordable 3D printing for everyone All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament.Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk. Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box! Features Factory Calibrated Heated aluminum build plate nozzle cooling fan for printing all filament types Quick-release steel gear filament feeder Easy to use color LCD 0.4mm extruder diameter Complete kit with bed scraper, and MicroSDTM card with preloaded model files Micro USB and MicroSD card connectivity PC and Mac compatible Compatible with Cura, Repetier, and other.Read Full Reviews..

Product Features

  • The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials
  • Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
  • Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory.
  • We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!
  • PC and Mac compatible. Compatible with Cura, Repetier, and other software.Max. Extruder Temperature: +482°F (+250°C)

BEST 3D PRINTERS UNDER $300

The da Vinci Jr Pro 3D Printer

Best budget 3D printer

Buy Now On Amazon 

The XYZprinting da Vinci Jr. 1.0 Pro. Is a compact 3D printer for professionals, the da Vinci Jr. 1.0 Pro is compatible with 3rd party 1.75mm PLA filament and has adjustable temperature settings for the extruder nozzle. This is the first da Vinci 3d Printer to allow the use of “open filament” – in other words, anybody else’s filament can be used in their system. What they fail to tell you is you have to load everybody else’s filament thru the back of the printer, and there is nothing to mount that spool on. Read Review…

Product Features

  • Open Source Filament: XYZ 3D printer that allows 3rd party 1.75mm PLA filaments; Standard alone 3D printer, 5.9” x 5.9” x 5.9 built volume and Fully enclosed design
  • Print with any 3rd Party Filament: The da Vinci Jr. 1.0 Pro has adjustable temperature settings for the extruder nozzle, making it compatible with 3rd party 1.75mm PLA filaments
  • UL listed “for the purpose of classification or evaluation with respect to one or more of the following: specific risks only, e.g., casualty, fire or shock”
  • 0.3mm Nozzle Upgrade Optional Add-on:The 0.3mm diameter extruder can provide a smoother print surface at a spectacular 50 micron resolution.XYZware Pro can change the nozzle and print bed temperature, speed, print support and retraction settings. XYZware Pro is compatible with third party g-codes* *(Cura and Slic3r)
  • Storage Temperature-Filament:0­-38°C (32~100 °F)

Best Sellers in 3D Printing Liquid

REPRAPGURU DIY RepRap 3D Printer

Best cheap 3D printer 2020

Buy Now On Amazon 

RepRapGuru is your ultimate platform for the finest quality experience in terms of DIY 3D printers. Our team of experts have spent countless hours to develop a deluxe DIY RepRap Prusa i3 printer kit that does not require altering, drilling, soldering or cutting. The RepRapGuru Prusa i3 V2 kit comes with all the hard work done so you can focus on your own 3D printer building experience. After you have completed your build you will have a better understanding of how 3D printers work and will be able to easily modify your printer if you choose to do so.

This kit is not only the perfect solution for educators looking to introduce 3D printing in their classrooms, it is also a perfect kit for anyone wanting to break into the 3D printer world at a affordable cost.

The RepRap Guru Prusa I3 V2 has an Impressive 8″x8″ heated build area topped with a genuine piece of borosilicate glass. The V2 also includes the 2004 LCD w/ SD card reader allowing the user to print from a SD card with out a computer connected. The V2 uses a 1.75mm direct feed extruder that is fitted with a .04 nozzle allowing a print resolution of 100 microns. The V2 frame is constructed of 1/4″ premium cast acrylic accompanied with plastic injected molded parts for precision fitting and a sleek professional look. The V2 is fitted with our custom spool holder allowing a free hanging reel.Read Full Review..

Product Features

  • USA customer tech support
  • No soldering, cutting or drilling
  • Borosilicate heat bed glass & 2004 LCD included
  • Impressive 8″x8″x7″ build area
  • Open source firmware
  • All injected plastic parts
  • MAC, PC and Linux Ready

Monoprice Maker Select 3D Printer v2

Best 3D printer Under 300

Buy Now On Amazon 

If you’re ready to take your ideas and designs from paper or CAD file to the next level, the Monoprice MAKER SELECT 3D Printer is the perfect starter solution for your needs! Unlike kit-based printers, which require a certain level of knowledge, experience, and time to assemble, the MAKER SELECT 3D Printer is assembled using only 6 screws and includes everything you need to begin printing right out of the box. With the ability to print any type of 3D filament and a price point lower than most DIY kits, this entry-level 3D printer is the easiest and least expensive way to join the 3D printing revolution! Includes 2GB micro SD card preloaded with printable 3D models out of the box Includes sample PLA filament so you can print right out of the box Heated build plate allows for high-reliability printing of slow cooling materials, such as ABS Can use compatible software, such as Cure, Repeater, or Simplify 3D Expanded user’s manual with detailed, easy-to-follow assembly and usage instructions Tighten just 6 screws and be printing in 10 minutes Choose to give the innovative and creative gift of learning.

Product Features

  • Includes Heated Build Plate, 2 Gb Micro Sd Card and Sample PLA Filament. Compatible softwares: Such as Cure, Repeater, or Simplify 3D, the Maker Select is compatible with Windows, Mac OS X, and Linux
  • Quality Assurance/Technical Assistance: Live chat at Monoprice.com Mon through Fri 6am – 6pm PST | Email at tech@monoprice.com | Phone at 877-271-2592 Mon through Fri 6am – 5pm PST.
  • Large volume: The large 8 x 8 inches build plate and generous 7 inches vertical spacing means that you can print larger, more complex models. Note: Ensure that the nozzle temperature is set to the correct value for the type of material being printed.
  • Check that the GCODE file is complete and not corrupted. Check the original model file. Heated build plate: The heated build plate allows you to print slower cooling materials, such as ABS and modified ABS, as well as PLA and PLA blends
  • Micro SD card slot: Use a micro SD card to store sliced G Code files, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC. Printable Materials- ABS
The Best 3D Printer 2020
Best Overall 3D Printer
Best Budget 3D Printer
Best 3D Printer Under 100
Best Cheap 3D Printer
Best 3D Printer Under 50
Best 3D Printer Buying Guide
Best Affordable 3D Printer
Best 3D Printer 10 List

XYZPrinting da Vinci 1.0 Pro. 3D Printer

Best 3D printer For home

Buy Now On Amazon 

The da Vinci Pro Series allows anyone to wirelessly send 3D files from their computers/ laptops or tablets to their 3D printer, from anywhere in their local area network. No lines, no cable management, no worries.

The da Vinci Pro allows you to adjust the temperature settings for the extruder nozzle and aluminum print bed which makes it compatible with third-party 1.75mm filaments. Select your favorite filament brand for the best 3D printing experience. The da Vinci Pro also has an auto-loading filament system that will ensure the filament is loaded correctly and ready for use. This 3D printer is the most versatile of its kind, providing different types of finishing quality while maintaining an unbeatable price.

The da Vinci Pro Series use specially designed knobs and detection software, which will guide you step-by-step and let you have an easy calibration experience.Read Full Reviews..

Product Features

  • Open Source Filament: the first XYZ 3D printer that allows 3rd party 1.75mm ABS and PLA filaments
  • New Aluminum Print Bed: more even heat distribution compared to common glass print bed allows a higher level of prints and New Innovative Calibration System: newly designed, frustration-free sensors and knobs ensure each print is perfectly calibrated
  • UL listed “for the purpose of classification or evaluation with respect to one or more of the following: (1) specific risks only, e.g., casualty, fire or shock, (2) performance under specified conditions, (3) regulatory codes, (4) other standards, including international standards, or (5) such other conditions as UL may consider desirable.
  • WiFi LAN Connectivity: send print jobs directly from your Windows or Mac computer, or the XYZ app
  • XYZware for Pro: bundled with powerful software that enables you to adjust multiple printer settings such as speed, print support, and retraction.Power Requirements:100V ~ 240V 200W

Best Sellers 3D Printing Granules

BEST 3D PRINTERS UNDER $500

QIDI TECH X-one2 3D Printer

Best 3D printer Under 500

Buy Now On Amazon 

The QIDI TECH X-one2 3D Printer is one of the best 3D Printers. 3D Printer is equipped with 3.5 Inch touch screen, which make it sensitive, and avoid screen garbled. The LCD touch screen design allows you to experience a more user-friendly 3D printer interface. High-quality aluminum plate, high flatness, effectively solve printing faults, heat evenly after heating, which are not easy to deform. Heating platform supports printing ABS filament as well as PLA filament. 

Single extruder and injection mold of 3D Printer make it easy, stable printing at one time, smooth surface without wire drawing. At the same time, it has a good ventilation effect.Read Full Reviews…

Product Features

  • PRECISE 3D PRINTER- The CNC machined the integrated XY platform with a thickness of 6mm to ensure XY flatness and platform strength, improve the accurate positioning of the nozzle, and effectively improve the printing accuracy.
  • 3D PRINTER with ADVANCED TECHNOLOGY- The 3D printer XY axis motion is built with advanced technology, smooth motion and low vibration, which can better ensure accuracy. Upgraded extruder greatly reduces plugging risk and bad extrustion.
  • LCD TOUCH SCREEN PRINTER with HEATING PLATFORM- The LCD touch screen design allows you to experience a more user-friendly 3D printer interface, making it easier to operate.With heating bed, printing models will stick well on the bed, printing performance will be better.Heating platform supports printing ABS filament as well as PLA filament.
  • PROFESSIONAL PRINTING MACHINE- The printer has a professional 3D printing motherboard and powerful performance, which is effectively improving the stability of the machine and extending the life of the printer.
  • EASY TO OPERATE with 6 MONTHS-WARRANTY- Just with a simple operation can you print what you want. 6 month warranty is always available for free repair or spare parts replacement.If any part needs to be replaced, the company will provide the parts for free. This includes the main board, motor, extruder or power.

BEST 3D PRINTERS UNDER $1000

FlashForge Finder 3D Printers

Best 3D printer 2020

Buy Now On Amazon 

FlashForge is improving and doing the updates from time to time. To make sure you have the best experience with the 3d printer, please ALWAYS UPDATE FIRMWARE TO LATEST VERSION. You can do firmware update on the printer quickly..Finder features an intuitive calibration detection system to assist leveling. You are directed to tighten or loosen leveling screws until a beeper barely sounds, then it detects the distance between nozzle and build plate to verify whether your leveling is at the right position. Once the first location is leveled, you’re directed to next two screw locations accordingly with same operation. In this whole process, you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise than before.

Finder features the 2nd generation Wi-Fi connection with more stable wireless file transmission. And now you can send 3D files from your computer to Finder 8GB memory with your own Wi-Fi network under AP or STA modes. Finder supports 3D Cloud function. 3D Cloud not only allow you to store, edit, share and printing status checking online, but also provides you a massive model database. Read Full Reviews..

Product Features

  • Slide-in build plate allows printed objects to be easily removed
  • 3.5-Inch full color touchscreen with intuitive icons makes for easy operation
  • Sturdy, plastic alloy construction ensures stable prints
  • Safe, non-heated build plate
  • Wi-Fi, USB, flash drive and Cloud connectivity.Printing material: PLA only.

Best 3D Printing Filament

QIDI TECHNOLOGY 3DP 3D Printer

Best quality 3D printer

Buy Now On Amazon 

qidi technology 3D printer qidi Tech I is the most precise and dependable 3D printer. Each 3D printer is leveled, fully calibrated and operated 8 hour before delivery. Qidi Tech after-sales team supplies technical support and lifetime service. Easy operated, high quality printing result. Qidi Tech 3D printer compatible with this slicing software. Read Full Reviews..

Product Features

  • Fdm technology; dual Extruder; obtained CE,FCC, RoHS certificates; qidi technology is registered trademark by edify technology Inc
  • Aviation level aluminum plate its surface is completely flat and will NOT warp during heating process
  • Easy to Use software for simple customization of 3D models
  • Fully metal external frame much more stronger than PVC plate and wooden frame.New high heat resistant metal platform supports replace plastic supports
  • Support Software:QIDI Print,Replicator G,Compatible with Simplify 3D
  • QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free 6-month warranty.

BIBO 3D Printer Dual Extruder

Best overall 3D printer 2020

Buy Now On Amazon 

BIBO 2 Touch Laser is the most featured printer. BIBO 2 Touch Laser includes two important gifts now: WIFI module (USD 6, pre-installed) and laser engraving module (USD 17). It is, of course, a 3D printer. But it’s also a laser engraver, too, permitting the ability to engrave on wood or even cut paper and cardboard. Not every 3D printer has such an extra feature, and those that do often cost far more than this machine

This is my first 3D printer. I’ve never used one before purchasing the BIBO 2 Touch. I was considering the dremel printer because I’d heard it was good to learn on. I was also looking at the flash forge creator, both of which have relatively good reviews and are in the same price range. Ultimately I decided to go with the BIBO 2 touch based on all of the glowing reviews (though, I can be a bit skeptical of all positive reviews) and for the simple facts that of those three printers, this one had the best combination of bed size, print height, dual extruders and also included a laser engraver.

Product Features

  • Full Color Touch Screen: with no threshold,which is more friendly and easier operation
  • Laser Engraving: extremely good at engraving objects such as wood, plastic, leather, paper and even cutting thin materials like plastic
  • Filament detection: If the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing, very useful for big volume object printing
  • WIFI Control: the included networking feature permits you to control the print via a phone or PC
  • Copy printing: dual extruders can print two same objects at one time, cut your printing time at least in HALF

Best Sellers in 3D Scanners

FlashForge 3D Printer Creator Pro

A best mid-range 3D printer

Buy Now On Amazon 

This is a great 3d printer, if you want the least amount of hassle and the shortest learning curve, this is the one. My only strong recommendation, is that you buy simplify 3d with it.

3d printing takes much trial and error. Different filaments, different temp settings, different slicing software, etc etc. FFCP takes a lot of that out of the equation.

Sturdy metal frame is substantially more stable than the Creator’s original wood frame.Warp-resistant 6.3mm aluminum build platform remains perfectly level under the stress of high heat.New high heat resistant metal platform supports replace plastic supports.New heavy-duty (10mm) z-axis guide rod ensures steady and precise movement. New acrylic cover encloses the chamber to insulate and protect ABS prints.New LED light illuminates the printing area.New integrated LCD screen and button board functions error-free. SD slot is repositioned for more convenient access. Read Full Reviews..

Product Features

  • Full manufacturer’s warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians
  • A sturdy metal frame that is substantially more stable than the Creator’s original wood frame.Build volume 8.9 X 5.8 X 5.9 inches
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in]
  • Please refer the user manual below for better use

REPRAPGURU DIY RepRap 3D Printer

Best cheap 3D printer 2020

Buy Now On Amazon 

RepRapGuru is your ultimate platform for the finest quality experience in terms of DIY 3D printers. Our team of experts have spent countless hours to develop a deluxe DIY RepRap Prusa i3 printer kit that does not require altering, drilling, soldering or cutting. The RepRapGuru Prusa i3 V2 kit comes with all the hard work done so you can focus on your own 3D printer building experience. After you have completed your build you will have a better understanding of how 3D printers work and will be able to easily modify your printer if you choose to do so.

This kit is not only the perfect solution for educators looking to introduce 3D printing in their classrooms, it is also a perfect kit for anyone wanting to break into the 3D printer world at a affordable cost.

The RepRap Guru Prusa I3 V2 has an Impressive 8″x8″ heated build area topped with a genuine piece of borosilicate glass. The V2 also includes the 2004 LCD w/ SD card reader allowing the user to print from a SD card with out a computer connected. The V2 uses a 1.75mm direct feed extruder that is fitted with a .04 nozzle allowing a print resolution of 100 microns. The V2 frame is constructed of 1/4″ premium cast acrylic accompanied with plastic injected molded parts for precision fitting and a sleek professional look. The V2 is fitted with our custom spool holder allowing a free hanging reel.

Product Features

  • USA customer tech support
  • No soldering, cutting or drilling
  • Borosilicate heat bed glass & 2004 LCD included
  • Impressive 8″x8″x7″ build area
  • Open source firmware
  • All injected plastic parts
  • MAC, PC and Linux Ready

Best 3D Printer Under $1500

LulzBot Mini Desktop 3D Printer

Buy On Amazon 

The LulzBot Mini is built in Loveland, Colorado and is backed by award-winning documentation and an acclaimed technical support team. Your LulzBot comes with a full one-year warranty that includes a year of phone and email support. LulzBot’s community forum is extremely active and is a great place to get tips and tricks, and to share photos of your awesome creations.

The LulzBot Mini is a high performance desktop 3D printer engineered to be easy to use. Even better, the LulzBot Mini is Open Source Hardware, certified by the Free Software Foundation for respecting your freedom. Computer World exclaimed, “Any serious maker should consider this machine because of its flexibility, accuracy and speed”.All LulzBot products use Free Software and are Open Source Hardware. This means your LulzBot Mini uses proven technology developed collaboratively. It also means you are free to adopt the latest and greatest technology being developed across the 3D printing industry, from new software packages to experimental materials.The Mini ships fully assembled and calibrated so you will be printing within minutes of opening the box.

Product Features

  • Enjoy awesome ease-of-use features including auto-bed leveling, auto-nozzle cleaning, an easy carry handle, new Cura software, and a low maintenance PEI print surface
  • Print Volume: 6in x 6in x 6.2in (152mm x 152mm x 158mm). Layer resolution as fine as 50 micron and as coarse as 500 micron, depending on part geometry and speed/finish requirements
  • Maximum temperatures of 300°C (572°F) for the hot end and 120°C (248°F) open a world of material possibilities. Top Print Speed: 275mm/sec (10.8 in/sec) at 0.18 mm layer height
  • Modular tool head carriage design allows plug-and-play with different print heads for growing selection of 3D printing filament materials
  • Freedom to use any number of 3D printing software programs, Cura LulzBot Edition comes standard. Other compatible software includes OctoPrint, BotQueue, Slic3r, Printrun, MatterControl, and more

Best 3D Printer Under $2000

MakerGear M2 Desktop 3D Printer

Buy On Amazon 

I bought the Makergear M2 because of its relatively large table; I could find no complaints about it; made in the USA; and it used reels rather than cartridges.

Some other printers could not build things as large as I needed to build (I’d like to build things even larger). Another printer vendor had a larger build area but used cartridges, rather than reels of plastic, making the material costs much higher.

Potential buyers should be aware up front that they are not getting an HP LaserJet that you can just plug in and run with. This is a machine for professionals and hobbyists. If you’re not willing to invest time to experiment and learn, don’t get a 3D printer. The documentation is sketchy and inconsistent as you might expect from a small company. They do respond quickly to questions, however.

Product Features

  • Large 8″ x 10″ x 8″ (XYZ) Build Envelope
  • CNC Machined Precision Hardware On A Rigid Fabricated Steel Frame
  • Open Source Electronics And Firmware
  • Works Out-Of-The-Box With ABS, PLA, PET, Flexible And More
  • Thoughtfully Crafted In Beachwood, Ohio

Best 3D Printer Under $2500

LulzBot TAZ 5 Desktop 3D Printer

https://images-na.ssl-images-amazon.com/images/I/91KeihG-uTL._SL1500_.jpg

Buy On Amazon 

The LulzBot TAZ 5 builds on the award-winning TAZ 4, with the LulzBot Hexagon all-metal hot end capable of printing at 300-degrees-Celcius, an advanced heated PEI print surface, and Cura LulzBot Edition printing software.

Backed by Acclaimed Customer Support

Every LulzBot 3D printer includes 1-year of fre phone and email technical support, award-winning documentation, and a 1-year Limited Warranty. Help is here if you need it!

Product Features

  • Graphical LCD Control Panel with SD card for tetherless printing.
  • Large Print Area: 298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in).
  • Modular toolhead design for easy upgrading.
  • igus polymer bearings for quiet, smooth, low-maintenance operation.
  • .50mm nozzle for fast and reliable printing

Best 3D Printer Under $3000

MakerBot Replicator Desktop 3D Printer

Buy On Amazon 

MakerBot has been a pioneer in 3D Printing space with their Replicator 3D Printer already on its 5th generation. MakerBot was launched in 2009 following the early progress of the RepRap Project.

Winner of “reddot design award” MarketBot Replicator offers the ease of use and connectivity for all your 3D printing needs in 2015, which means you can connect to the printer with your smartphone, tablet, or a desktop computer. It has a full color 3.5 LCD Display with an intuitive control dial for a rich user experience.

It has an on-board camera inside the printer so you once you initiate the printing process, you can go anywhere and remotely monitor the progress using MakerBot mobile app available for both android and iOs.

Product Features

  • Fifth-generation technology defines the new standard for ease of use, quality, and reliability
  • Powered by the new, user-friendly MakerBot Replicator 3D Printing Platform
  • App and cloud enabled
  • On-board camera and diagnostics, and assisted build plate leveling
  • New MakerBot Replicator Smart Extruder, motion controllers, and gantry design

BEST 3D PRINTERS BUYING GUIDE 2020

Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *